Adjusted Cabin Height

Here are the missing cabin top sections that belong on bulkheads 2, 3, and 4, as it may have been obvious in some of my previous photos that these bulkheads were cut off straight a short distance above the sheer level. I separated these upper sections deliberately in the bulkhead layout phase, knowing I would have to compensate for my raised bunk modification. In the photo below they are temporarly clamped into position, but when I am ready to set the height and put them permanently in place after the hull is complete to sheer level, they will be put back on in the same manner the hull panels are joined together. The opening in bulkhead no. 3 will be cut much higher after these are rejoined and the cabin is built.